Product Code: 203-0000000007
Availability: Custom made in 10-15 biz days
We came up with a high end version of our raceways! Choose from cedar, which is a higher quality wood then we use for our raceways, or pine wood. Its finished with to applications of tung oil, which natuarlly seals the wood. This piece is made up of 3, 11" wooden planks that are attached with two separate pieces of stretchier bottomweight gray fabric. The lengths are: 32" flat top, 20" angle. They are also avalible in our stiffer fabrics and stain colors rather then the tung oil.
They are very strong and reinforced with three layers of board and attach to the wall with large 4" brackets. Each raceway is built to be mounted between 16" studs (if yours are spaced differently, leave a message in the notes when you place your order and we will build it accordingly).
How much weight do the shelves hold?
We haven't actually maxed out the weight on our shelves yet, so it's hard to give an exact number. We have tested them at 54lbs, and they didn't budge. We use corner braces for brackets that are attached from the top, so that when weight is applied it pushes the shelf tight against the wall. That creates a very sturdy hold. They do need to have at least one of the brackets mounted into a stud. If you don't have studs avalible, then there is other possiblities like heavy duty dry wall anchors. Home depot has packs of 6 fthat are rated to each hold 65lbs for under $5.
All of our shelves only have one bracket mounted in studs. We've applied 45lbs on ours and they were fine. If I we're going to guess I would say about 50-55lbs would be pushing it.
What if I have no studs to install the shelves. Can they be installed into drywall or plaster?
If you don't have studs available, there are other possibilities, like heavy duty drywall anchors. Home depot has packs of six that are rated to each hold 65 lbs. for under five dollars.
We've never tried these with our raceways, or fabric play place. We're not sure that they would hold tight enough. They get pulled from the side each time a cat jumps on, so we really suggest mounting those into studs.
Do the shelves come with mounting equipment?
All of our pieces come with screws, light duty drywall anchors and brackets attached. Except for our cat bridge. Because it typically sits at a doorway, we don't know where the studs are, so we include brackets but do not attach them.
What do I need to mount the shelves?
You need a screw driver, a drill, and a stud finder.
Also a level, if you want them perfectly straight.
I purchased two of these deluxe hammocks and I'm very pleased with the quality and appearance. My "cat walks" span 24 horizontal feet with the highest platform being 14 feet off the floor so I needed a way to get height and length in one product. I used these in combination with the cat shelves and the wall-mounted horizontal sisal cat pole. The combinations and diversity look very nice and compliment my gallery wall of photos, prints and other art work.